clifton plumbing logo

(973) 858 5005

24/7 Customer Support



If your sink is not draining effectively for more than two minutes, you have a sluggish draining sink.

Your sink’s drain may be running slowly for a number of reasons.

It is now time to identify the potential causes and determine a solution to the issue.

While there isn’t a single way to unclog a sink, there are a few things you may try.

Starting with the simplest choice is an option.

The use of vinegar or baking soda is one of the more efficient ways to unclog a sink.

Here’s how to fix a sink that drains slowly.

1. Make the sink stopper clean

Due to its location at the drain’s mouth, the sink stopper is prone to collecting hair and other debris.

The large fragments that become trapped may cause a delayed drain.

The modern sink stopper is simple to unscrew for cleaning.

The steps shown below will help you remove the sink stopper for cleaning.

  • Check the area where the pipe and sink join underneath the sink. A rod, nut, and clip are visible.
  • To loosen the nut, turn it with pliers. Lift the stopper from the drain after squeezing the clip to release the tiny rod.
  • To properly remove and clean grimy residues, use a rag.

2. Burn off the mud

The aperture gets smaller when slimy muck coats the inside of the drainpipe in your sink.

This causes delayed drainage a result.

The residue is easily removed with common home materials like:

  • Pour 1.5 cups of baking soda down the drain. 1/2 cup of white vinegar should be added.
  • The popping and fizzing reaction will help remove tiny obstructions.
  • To prevent the reaction from bubbling out, make sure the drain is stopped with a rag.
  • To flush the melted slime, wait 15 minutes before pouring boiling water down the drain.

3. Utilize a sink plunger

Sometimes the clog may be deep within the drain, out of reach of standard drain cleaning equipment. 

The sink plunger can be quite useful in these circumstances.

How to utilize a sink plunger is as follows:

  • Place a towel over the sink overflow hole and set the sink plunger over the drain.
  • Put water in the sink, covering the plunger cup entirely. To push a lot of air down the drain, quickly and briefly plunge up and down.
  • If you notice the water in the sink draining swiftly, the obstruction has been removed.

The problem with a slow-draining sink gets worse with time. 

To reduce the likelihood of a slow drain, you should take a few simple steps. You can occasionally remove the plug from the drain and pour a solution of vinegar and table salt down it. 

To remove tough grime, flush it away with boiling water.

For instance, throw away any loose hair strands that are in the sink. 

If you wash them down the sink, the hair can get stuck. 

A slow drain is finally caused by the accumulation of hair debris that has been trapped. 

We hope that these easy steps may assist you in fixing your slow drain. Do you believe you can do it alone at home?

You can always count on the Clifton plumbers at BJC Clifton Plumbers to take care of your drain and A/C problems.

Our crew is available to assist whether the aforementioned solutions have not worked or you are scared to handle the unclogging process yourself. Contact our licensed plumbers right away by dialing (973) 858 5005. We provide our full range of plumbing services to residences in and around Clifton, New Jersey.